How to test TXBF!!

Settings in the AP and Client
GW-AP w. SDK 1.2.0 installed (Beamformer)

–GUI settings
•NPHYTx/NPHYRx Chains: 3/3 (wl ratesel_nss 3)
•BFR/BFE: Enabled/Enabled (wl txbf 1)
•Mode: Access Point (wl ap 1)
•802.11 Band: 5 GHz (wl band a)
•Channel Specifications: 40/80 (wl chanspec 40/80)
•Bandwidth: 80 MHz

–Commands
•wl txbf_bfr_cap 1
•wl spect 0
•wl mpc 0
•wl spatial_policy 1


§BCM43460 module client (Beamformee)

–Commands
•wl txbf_bfe_cap 1
•wl mpc 0
•wl txchains 1
•wl rxchains 1

Note:

1. configure 3tr BRF to 1 rx BEE

2. disable two streams on BEE